AMT Datasouth Fastmark M1 Podręcznik Użytkownika Pobierz pdf (Strona 493)

100

101

Zebra Printers

Printer Options Section

PrintMode

The Print Mode instruction determines the action the printer

takes after a label or group of labels has been printed. There are

five different modes of operation:

n Cutter - The web separating the printed label and the

next blank label to be printed is extended into the cutter

mechanism. The label is cut; the blank label is then

retracted into the printer so that it can be printed.

n Peel Off – After printing, the label is partially separated

from the backing. Printing stops until the label is

completely removed. Peel off handling requires that the

stock in the printer be properly fed through the peel off

attachment on the printer. Select only if printer is

equipped with an internal rewind spindle.

n Rewind - Label and backing are rewound on an optional

internal rewind device. The next label is positioned under

the printhead.

n Tear Off - After printing, the label is advanced so that the

web is over the tear bar. Label, with backing attached,

can then be torn off manually.

n Applicator – After printing, the label may be

mechanically removed and applied to an object.

n Don't Send - The PrintMode instruction is not sent to the

printer. Select this option if you want to retain the

printer's PrintMode setting.

Note: The Don't Send option is only available if you

select the ZPLIIfamily driver as the printer Model.

If the Label Cut Option, Cut Option, is set to Use Label

Cut Options, the Print Mode setting IS sent to the printer

Loftware LabelManager Version 10.1.1 User's Guide

493

1 2 ... 488 489 490 491 492 493 494 495 496 497 498 ... 531 532

Komentarze do niniejszej Instrukcji

Brak uwag

AMT Datasouth Fastmark M1 Podręcznik Użytkownika Strona 493

Komentarze do niniejszej Instrukcji